The service life of industrial pumps is inseparable from standardized daily inspections. By combining the pump maintenance standards and the after - sales operation and maintenance experience of Hebei Jutong, we have sorted out practical inspection points that even novices can quickly master.
Inspections mainly adopt the core methods of visual observation, listening and hand-touching. Focus on checking whether the values of the vacuum gauge, pressure gauge and ammeter are stable every day to avoid pump damage caused by abnormal pressure or current. Touch the bearing part by hand to check the temperature, oil quality and oil level. If the temperature is too high or the oil quality is turbid, it needs to be handled in a timely manner, and the lubricating oil in the bearing box should be replaced every six months.
Listen to the operation sound of the pump. If there is abnormal noise or vibration, it is likely that the impeller is blocked or the balancing device is abnormal, and the machine must be shut down immediately for inspection. At the same time, check whether the pipeline is leaking water or air, whether the packing tightness is appropriate, whether the water cage of the suction pipe is blocked, and whether the motor temperature and cable lines are normal.
Do a good job in inspection records and handle potential hazards in a timely manner, which can effectively extend the service life of industrial pumps and reduce the loss caused by shutdown and maintenance.
