The mineral processing pump is single-stage single-suction cantilever horizontal centrifugal pumps, which are suitable for transporting liquids containing suspended solid particles in industrial sectors such as metallurgy, mining, coal, and electric power building materials. Such as concentrate, tailings, ash, cinder, cement, soil, mineral sand and other strong hardness, strong corrosion high concentration slurry. The temperature of the solid-liquid mixture to be conveyed does not exceed 80 ° C and the weight concentration can reach 60%.
Product Features
Delivering a liquid containing suspended solid particles;
The temperature of the solid-liquid mixture is conveyed <80 ° C;
The maximum slurry concentration delivered is CV ≤ 60%; CW ≤ 60%.
Outlet diameter: 25 – 300mm
Traffic: 3.6 – 2455.2 m3 / h
Head: 5-98m
Power: 2.2 – 480kw
Application
Power plant ash removal and transportation of ash and mortar.
Coal Mining Industry coal mining, washing and transportation of various coal pulp.
Metallurgy transportation of slurries, pulp, ash, slag, etc. in various smelting plants.
Mines transportation of ferrous and non-ferrous ore pulp, from hydrocyclone feed to regrind, flotation and tailings in various mineral processing plants.
Construction materials transportation of various mortars, sand, gravel, aggregate, concrete, solids, lime, etc.
Chemicals transportation of various highly abrasive corrosive materials (such as phosphate fertilizer).
Environmental protection transportation of flue gas desulfurization (FGD) abrasive corrosive slurry.
River dredging pumping, suction, dredging and discharging of sludge, muddy sands, and high-plastic clay in the lakes, river, etc.
Maintenance
In order to ensure the normal operation and extend the service life of the mineral processing pump, it is recommended to regularly check the status of the pump and motor to ensure that all parts are intact and there is no debris in the pump. During installation, attention should be paid to the foundation size and the pre-embedded anchor bolts. After installation, manual rotation should be performed to check for scratches. In addition, to prevent debris from entering the pump, it is recommended to install a filter at the inlet and ensure that the filter area is larger than the cross-sectional area of the pipeline.
Precautions
Before installing the coupling or belt, check that the steering of the drive is correct and look at the mineral processing pump for clockwise rotation It is strictly prohibited reverse operation! Otherwise, there will be great damage to people and equipment.
The mineral processing pump must not be operated for a long time at low or no flow. Otherwise, it will cause the pump unit vibration or even pumping liquid Vaporization, cause equipment damage
The pump is rotating equipment, before installing and maintaining the pump unit, must cut off the power. Otherwise may cause personal injury.
When the pump unit operates, it is forbidden to enter or remove the protective cover, otherwise, it will cause personal injury.
Our factory
Hebei Jutong Pump Industry, with 35 years of industry experience (founded in 2021), has rapidly developed core products such as slurry pumps and mechanical seals; in 2022, it obtained three international certificates through intelligent manufacturing upgrades and entered the high-end mining market; domestic project equipment has been running stably for more than 50,000 hours, and 85% of customers continue to repurchase; in 2024, products will be exported to Chile and Indonesia to participate in international engineering construction; in 2025, it plans to cover 50 countries and regions around the world, with an export volume of more than 50 million. If necessary, please contact us and we will provide you with professional advice.
Hot Tags: mineral processing pump, China mineral processing pump manufacturers, suppliers, factory, corrosion resistant sump pump, sand gravel pump, submersible acid pump, chemical resistant centrifugal pump, acid resistant sump pump, multi purpose pump
